How to use the calculator
- Type the Base: any side of the triangle.
- Type the Height: the perpendicular distance from that base to the opposite corner.
- Click Calculate Area. The result reads "The triangle area is …" with two decimals.
Use a dot for decimals, as in 5.5. Base and height must be in the same unit; the result is in that unit squared (ft², m², in²). Reset empties both fields.
The formula
A triangle is half of a parallelogram with the same base and height, so its area is half of base times height:
The height is not a side (except in a right triangle). It is the straight line that drops from the top corner to the base, or to the base's extension, at 90°.
The gable end of a shed
The wall is 24 ft wide at the bottom and the peak is 8 ft above it.
24 × 8 ÷ 2 = 96 ft². The calculator shows 96.00. That is the siding or paint area for one gable.
When you only know the three sides (Heron's formula)
For sides 13, 14 and 15, the semi-perimeter is s = (13 + 14 + 15) ÷ 2 = 21.
Area = √(s · (s − a) · (s − b) · (s − c)) = √(21 · 8 · 7 · 6) = √7,056 = 84.
This tool asks for base and height, so here is the shortcut: the height on the 14 side is 2 × 84 ÷ 14 = 12. Type base 14, height 12 and you get 84.00.
Common mistakes
- Using a slanted side as the height. In the 13-14-15 triangle the sides next to the base are 13 and 15, but the height is 12. Using 13 gives 91, which is wrong.
- Forgetting to divide by 2. Base × height alone is the area of the rectangle around the triangle.
- Mixing units. Convert inches to feet (or cm to m) before you type. 1 ft² = 144 in².
Frequently asked questions
How do I find the area of a triangle?
Multiply the base by the height and divide by 2. A base of 10 ft and a height of 6 ft give 30 ft².
Does it work for any kind of triangle?
Yes. Acute, obtuse, right, isosceles or scalene: base × height ÷ 2 always holds. For an obtuse triangle the height may fall outside the triangle, on the extension of the base. If all three sides are equal, the equilateral triangle calculator needs only one side.
How do I calculate a lot shaped like a triangle plus a rectangle?
Split it, find each part and add them. Use the rectangle area calculator for the rectangular part. For a lot with four unequal sides, the irregular land area calculator does it in one step.
How do I convert the result to acres?
Paste it into the land area unit converter.